From bus wash sprayer systems to brick-and-mortar set-ups that run exactly like car washes, it’s not difficult to figure out how to wash a bus. Some drivers choose to wash their own buses, or the owner may put someone else in charge of cleaning the fleet. Who does the washing up doesn’t matter as much as how it’s done.

Whatever the method, there are dozens of tips that will result in a cleaner, shinier bus. Have it ready for school kids in the morning or passengers ready for a cross-country adventure.

Passengers deserve the best, regardless of how old they are or where they’re going. Young children and teens on the school bus need a disinfected, clean environment to keep seasonal bugs and illness away.

Did you Ever Seen Washing and Bathing of KSRTC Buses? Here it is…

They pass enough germs back and forth as it is. Adult travelers who choose to take the bus — whether it be down a city block or across state lines– deserve the same thing. Wherever these passengers go, it’s essential that they get there in a clean bus.

Rather than visiting a bus wash business, some fleet owners and bus drivers choose to wash their vehicles themselves. Washing a bus yourself can save money, and it gives the drivers freedom to choose their methods and their wash times; if a bus needs to be washed sooner than previously scheduled, it’s not a big deal! The only thing to keep in mind when washing a bus yourself is that you’ll need several specialized pieces of equipment.

Even if you already know how to wash a bus, you can’t do much without the correct tools. For example, a power washer is absolutely necessary when washing your bus. It reaches more areas than you can with a regular hose, plus you need the pressure to successfully clean the outside of the bus, which has a tendency to attract compacted, large messes. If you don’t have access to a power washer, a simple garden hose will do helpful for the final rinse and gentle cleaning. Next, make sure to grab your detergent and, if you choose, a foam mixer.

If you decide to be really old-school and wash your bus by hand, you’ll need much more. You’ve washed a car before, right? Maybe in your driveway on a sunny morning? Washing your bus is very similar! For the outside washing, grab the same things you would for an at-home car wash — gloves, sponges and scrub brushes, and buckets.

For the inside of the bus, assemble a different set of tools. Paper towels, brooms, multi-purpose cleaner, glass cleaner, and trash bags are all essential for inside cleaning. You may need air freshener, as well, and a vacuum never hurts to get fine dust and debris out of small cracks and crevices. Vacuums are especially handy for seats that gather unexpected debris in the microfibers or vinyl seat casings!

On the subject of detergent, you have to pick the right soap carefully. Not sure which type of detergent to use? Contact your local bus wash and inquire about which products they use. At any rate, the detergent you use should have a high pH level. Your detergent needs to be alkaline as possible for the best results and to keep the vehicle’s paint and finish as pristine as possible.

Never let the chemicals you use dry on the vehicle. This applies to everyone, even those of you who don’t use an additional foam mixer. After soaping down the exterior, you can let it rest for no longer than 60 seconds. After that, you need to rinse it off quickly. The tip is particularly important when you’re washing the bus outside in warm or windy weather.

Using hot water is always best when you clean a bus with a pressure washer. It’s a small but vital tip to remember as you learn how to wash a bus. Aim for a temperature that ranges between 90 degrees Fahrenheit and 100 degrees Fahrenheit — temperatures in this range are effective at melting away impacted dirt while also keeping your paint safe.

The inside of the bus gets just as dirty as the outside. You may be able to find a comprehensive, full-service bus wash that takes care of the interior as well as the exterior, but don’t be surprised if you don’t. Your fleet might have its own cleaning service, but that’s no guarantee either.

Just like cleaning the outside of the bus, however, cleaning the inside of the bus isn’t hard, even if you have to take care of it yourself. The first step is to get rid of any detritus. The best way to do this is to clean from top to bottom. That way, dirt, grit, and food particles will fall to the floor instead of spreading around and creating new messes. You may need to use upholstery cleaner on the seats, but a vacuum cleaner can suffice in relatively neat buses. Next, take your broom and sweep the floor. Just open up the doors and sweep dirt out the back. If the floors are especially dirty, consider mopping from front to back.

You can’t claim you don’t do windows when you have a bus to take care of, and not just because of how many there are. Windows get dirty on commercial buses. Everyone touches them — it doesn’t take much for a bus window to end up smeared, greasy, and unsightly. To clean your windows, try using old newspapers to wipe down the panes after you spray them with cleaner. The material in newspapers doesn’t leave nearly as many streaks. Before you finish up, make sure you’ve cleaned the windshield, the driver’s side window, the panes on the door, and the glass in the back.

Finally, when time is short, you can always find a bus wash that’s just like a traditional car wash. These drive-through washes are completely automatic, leaving the driver with no responsibilities beyond driving the bus through. Different washes may not have the same design, but they’re all set up in much the same way. Scrub curtains handle the top and the hood, while vertically aligned brushes tackle the back and sides of the bus.

Source – nswash.com

SHARE